It might be time for HN to shift to a font that distinguishes better between "Al" and "AI".
baxtr 58 days ago [-]
Especially confusing when there’s the word model up there as well
Spire42 58 days ago [-]
And “trains”.
lynndotpy 58 days ago [-]
"Gemini, Lowe, whatever. The model trains and works with Disney? I see, but I want to learn more about the funny deaths, what the hell?"
I also vouch for a font that differentiates lowercase-L and uppercase-i.
smokel 58 days ago [-]
AI is a hype, Al Lowe is a legend.
mathgeek 58 days ago [-]
How dare you call Weird Al hype?
hulitu 56 days ago [-]
You can use a different font in your browser. Good luck /s
bigstrat2003 58 days ago [-]
That was a great interview. I didn't realize model trains had so much computer stuff going on inside them these days! Maybe I should get into the hobby now that I'm an adult with space at home and disposable income.
dhosek 58 days ago [-]
Yeah, apparently the whole controlling the train by the voltage¹ and polarity of the electricity in the rails has been replaced with little digital chips in the locomotives that let you control each locomotive independently and not have to have them in separate zones on the layout. I have a bunch of stuff in the basement from when I was thinking of getting back into the hobby around 2001 and then, well, 2001 happened and put that all on hold. Maybe sometime in the future or maybe I’ll just sell it all off.
⸻
1. Or is it current? I have no idea,
TacticalCoder 58 days ago [-]
> Yeah, apparently the whole controlling the train by the voltage¹ and polarity of the electricity in the rails has been replaced with little digital chips in the locomotives that let you control each locomotive independently and not have to have them in separate zones on the layout.
Can I reuse the tracks (not the locomotives, just the track) from my Marklin HO and switch to digital trains? Sounds cool.
nic547 58 days ago [-]
Assuming you have the yellowish, metal tracks (M-Track) it should work more or less.
Electrically the tracks with the connectors for power might have capacitors for radio interference reasons, they're unnecessary for and cause problems with the digital signals.
With regards to the wheel-track geometry, Märklin hasn't changed that much and most modern rolling stock compatible with the "Märklin system" (commonly referred to as "3L"/"AC") should work on M-track. Only the small "industrial radius" tracks might be a bit problematic in general and longer cars can hit turnout signals (mostly a problem with long passenger cars that aren't shortened to 1/100 or 1/93.5 scale).
Some manufacturers have created "universal" wheelsets, those might be prone to derailments.
Digital trains need clean rails for proper operation, m-track is more vulnerable to rust and really needs proper rust removal, especially after not being used for a while.|
AFAIK it's not that rare to use m-track for storage yards and "non-visible" track rather than throwing it away.
dhosek 58 days ago [-]
Yep. And you can simplify your wiring since you only need to put in insulators where there would be a potential short (e.g., a Y loop) and not split the layout into zones for operation.
dhosek 58 days ago [-]
Also adding the chip to a locomotive is a pretty simple thing so you can retrofit older locomotives (it’s also possible to mix non-digital locomotives with digital locomotives).
nic547 58 days ago [-]
GP mentioned Märklin H0, so Y-Loops aren't a Problem anyway because both wheels have the same potential, it's a modified 3rail system with a bunch of studs in the middle as a 3rd rail.
kylegordon 58 days ago [-]
And that's just DCC. You can also add in I2C, MQTT, Canbus, Ethernet, BiDiB, Modbus, etc the list goes on
You absolutely should. Start small and see if you like it then expand.
You don’t want to be 80 and saying: I should have at least tried!
jacquesm 58 days ago [-]
> I got my first model train when I was 2 years old, and my dad wouldn’t let me play with it. So he ran it around the Christmas tree and I had to watch.
I wonder how many kids had this happen to them.
kirubakaran 58 days ago [-]
I’d say at least one
mrighele 59 days ago [-]
I never realized that Al Lowe was involved with Donald Duck’s Playground, I loved it as a child. I guess I have to be thankful to him for two things now.
throaway146 59 days ago [-]
I used to play it on my dad's mac at work (which he hated, it was a non-computer role and management forced a switch from Windows to Mac). It had a great look that does seem similar to LLL.
Of course on those machines, most of my time was spent dealing with the "insert disk for the program you were previously using" bug!
sgt 58 days ago [-]
He got so associted with Leisure Suit Larry that some people thought he was Larry. Quite the opposite (his own words) - he's happily married 50+ years and just loves technology and creation.
deepthaw 59 days ago [-]
I first really started to learn how to use computers playing Leisure Suit Larry on a friend's dad's computer. Started with copying save-games to/from floppy disks, to using MS-DOS in general, to BASIC, etc. and so forth.
It's interesting how much of the humor in those games flew way over my head yet I still had a blast playing them. And looking back as an adult, the "risque" stuff was tame as hell but still fun. Sigh, good times.
tombert 59 days ago [-]
Al Lowe is actually a pretty nice dude.
I’m not entirely sure why I did this, but when I was an adjunct for a few semesters, I emailed him for advice on teaching since he did the transition from teacher->programmer and I did the opposite.
He responded back very quickly with very helpful advice [1] and was very understanding and nice. I like him.
[1] I don’t want to share the emails since they are a bit personal, but the TL;DR was that he recommended I consider finding some training on how to be a teacher.
ta9000 57 days ago [-]
What’s great about Al Lowe is that he’s great at sleazy humor but as far as I can tell not at all sleazy himself.
t1234s 58 days ago [-]
Anyone who played LSL1 on a 5 1/4 floppy disk please stand up.
js4ever 59 days ago [-]
Al model train ... I was not expecting that article... To much AI in my life
linkjuice4all 59 days ago [-]
Much like Factorio - bringing too much tech/automation into your hobbies (such as model trains) just turns a fun weekend hobby into "work". It's really cool to see the progress with digital controls in model trains (read up about Neil Young and Lionel [0]) but I don't want to have to ask AI to rewrite my train handling config files just to get some little motor to spin.
> I don't want to have to ask AI to rewrite my train handling config files just to get some little motor to spin.
I reckon you could probably still figure out how to just edit the text file. And if it's not fun to do that, then, surely it's just not the right hobby?
sodapopcan 59 days ago [-]
Ya, I was wondering if this made it to the top because people though "Al" was "AI," heh.
em-bee 58 days ago [-]
does it really matter? it's a good topic either way. actually it's even better because it isn't about AI.
sodapopcan 58 days ago [-]
Sure doesn't! Was just a funny thought (depending on your definition of funny, of course).
unixhero 59 days ago [-]
What about Larry 4 Roar and Al
Rendered at 09:29:58 GMT+0000 (UTC) with Wasmer Edge.
I also vouch for a font that differentiates lowercase-L and uppercase-i.
⸻
1. Or is it current? I have no idea,
Can I reuse the tracks (not the locomotives, just the track) from my Marklin HO and switch to digital trains? Sounds cool.
Electrically the tracks with the connectors for power might have capacitors for radio interference reasons, they're unnecessary for and cause problems with the digital signals.
With regards to the wheel-track geometry, Märklin hasn't changed that much and most modern rolling stock compatible with the "Märklin system" (commonly referred to as "3L"/"AC") should work on M-track. Only the small "industrial radius" tracks might be a bit problematic in general and longer cars can hit turnout signals (mostly a problem with long passenger cars that aren't shortened to 1/100 or 1/93.5 scale). Some manufacturers have created "universal" wheelsets, those might be prone to derailments.
Digital trains need clean rails for proper operation, m-track is more vulnerable to rust and really needs proper rust removal, especially after not being used for a while.|
AFAIK it's not that rare to use m-track for storage yards and "non-visible" track rather than throwing it away.
Have a gander at https://www.jmri.org/help/en/html/hardware/index.shtml#netwo... for a good list of protocols
You don’t want to be 80 and saying: I should have at least tried!
I wonder how many kids had this happen to them.
Of course on those machines, most of my time was spent dealing with the "insert disk for the program you were previously using" bug!
It's interesting how much of the humor in those games flew way over my head yet I still had a blast playing them. And looking back as an adult, the "risque" stuff was tame as hell but still fun. Sigh, good times.
I’m not entirely sure why I did this, but when I was an adjunct for a few semesters, I emailed him for advice on teaching since he did the transition from teacher->programmer and I did the opposite.
He responded back very quickly with very helpful advice [1] and was very understanding and nice. I like him.
[1] I don’t want to share the emails since they are a bit personal, but the TL;DR was that he recommended I consider finding some training on how to be a teacher.
[0] https://thrasherswheat.org/tfa/trains-neil-young-1993.htm
I reckon you could probably still figure out how to just edit the text file. And if it's not fun to do that, then, surely it's just not the right hobby?