Wow, hi all, I am Kirk, the author of this blogpost, never thought my small ARM board home server would handle this much traffic!
Currently reading through these posts, feel free to ask questions. Great to see interest.
FYI, I am quitting my postdoc job in two months to work on this full-time, which should help the rate of progress, but my main source of income will stop. We hav ea small but it will only cover a few months of full-time work.
We'd really appreciate any support you're able to give, which we'll use to push this open technology as far as we can! We are planning to start work on a much bigger stack after the kit.
kirksmith 153 days ago [-]
*typo: meant to say we have a grant from NLnet https://fbrc.dev/posts/NLnet-funding/ , which will cover a few months of full-time work (for one contributor)
metadat 153 days ago [-]
Hey Kirk, this is a neat project and I admire your high level of commitment!
Question: What happens to the liquids once they have been used up and depleted? Is there a "recharge" procedure? If they can be reused, how many times before they become disposal waste?
kirksmith 153 days ago [-]
Hey, thank you!
The liquids are reusable, and are charged and discharged repeatedly without needing to replace the fluids. In other words the system is closed with respect to mass, only electrical energy (and minor amounts of thermal) are transferred in and out, reversibly. Flow batteries are similar to so-called reversible or regenerative fuel cells for this reason.
The answer to how long it lasts depends on many factors, and we hope to provide a clearer picture of that in our work.
In a well-designed system, they can last extremely long in comparison to, say, lithium-ion batteries. This is because flow batteries have different degradation pathways that are less severe and, if present, can usually be overcome through other solutions (e.g. electrolyte rebalancing, see ESS's "proton pump").
Log_out_ 153 days ago [-]
My brother has a farm and lots of solar, but no buffer. Do you think it realistic to convert a old, unused concrete walled and floored cleaned cow cesspit to liquid battery storage by dividing it? Or is classic modular containerstorage better?
mharig 152 days ago [-]
[dead]
perlgeek 154 days ago [-]
Lots of software started this way: as a toy, a proof-of-concept, a learning opportunity for the programmers.
I really hope that they find interested people who join their experiments, and build something awesome and open together.
ForOldHack 154 days ago [-]
This looks like a toy, but its INSANELY COOL! You build a proof of concept? This technology is cool.
I was at a tiny house competition, and we were using golf cart batteries, and the winner: The University of Santa Clara, CA:
"The house stores its energy using saltwater batteries, the only batteries in the world to be Cradle to Cradle certified."
That article is from 8 years ago. Saltwater batteries are hard to find right now since Aquion quit making them and I don't know of anyone retailing Salgenx yet.
ForOldHack 154 days ago [-]
Wow! You have totally done your homework. Totally. Yes, Aquion went out of business, and Salgenx is not on the market yet.
RobotToaster 154 days ago [-]
Home 3d printers started as repraps that could barely print a shot glass.
moffkalast 154 days ago [-]
That wasn't because it was a proof of concept tech, but because Stratasys was effectively patent trolling it since the 80s.
kragen 154 days ago [-]
it's possible the necessary inventions would have happened earlier without the patent problem, but the minimug era of reprap was not simply reproducing existing fdm machines; they were having to figure out a lot of things nobody had figured out before, like parts cooling fans, pla to use lower temperatures and avoid the need for a heated build chamber, threaded rod truss gantries, avr g-code interpreters, and eventually auto bed leveling, pla pinch extrusion, etc. there are things people could have told them, but if they'd done everything in the safe conventional way they would have ended up with a two thousand dollar machine
Fatnino 153 days ago [-]
"was"
They are still busy patent trolling today.
aa-jv 153 days ago [-]
True fact, I have Bre's first Roboexotica shot-glass, sitting on my junk bowl.
KennyBlanken 154 days ago [-]
I've been watching ESS (they make a non-toxic iron flow battery system) for years and been really frustrated that they have made essentially zero progress deploying the technology, with less than half a dozen deployments.
The technology looks great, but they seem annoyingly incompetent at marketing/selling their product...or are just holding out for "whale" customers, refusing to work with anyone except microgrid (ie college campus) and utility scale customers.
So many promising products and technologies die because the inventors/developers hold out for huge customers while ignoring the huge demand from retail/small/medium corp customers.
"We won't talk to anyone except corporations with deep pockets. Once we find a couple of those, we'll be filthy stinking rich!" instead of "if we sell the components at a price that undercuts LiFePO4, we'll have as many customers as we can handle, and there's plenty of margin for distributors and retailers, so we don't have to be B2C."
jillesvangurp 154 days ago [-]
The issue is actually with investors not investing and not with the companies not innovating. A lot of promising technology simply doesn't get funded. So it gets stuck in the R&D pipeline. Without funding, companies are struggling to get enough cash and have to limit their ambition level.
For example by just working with a handful of customers. Or by building a tiny factory that merely prove technical feasibility instead of a bigger one that would prove the business case as well as the technology benefits in terms of cost. Big battery factories are expensive and risky. And most battery tech doesn't really get profitable until you have a big factory and a few years of optimization. The price of the first batteries is generally really high and it can take years to get there.
This has been a problem with battery tech in particular where mostly companies in the US or Europe don't get much funding for new tech and where China actually seems to be doing a bit better. Which is why sodium batteries are shipping in China (CATL) and sort of stuck in R&D for many years elsewhere.
With flow batteries, the technology is kind of proven at this point. They work, they exist, etc. What's left to prove is the price point: can it be done cheaply? Everything seems to suggest yes. But proving that is going to require scaling production and a massive amount of investment to get that going. Think billions, not millions.
Small retail customers are not helpful here because those don't pay until after the factory gets built and starts shipping product. Demand is never the issue. It's doing the leg work to get to the promised price point at which that demand exists. That requires investment.
hlieberman 154 days ago [-]
The author actually talks about ESS in a comment to the linked blog post from the article. Apparently their battery generates a ton of H_2 that needs to be managed. That could easily be the sort of thing that only is possible/realistic at large scales, thus eliminating sizing the battery down indirectly. https://chemisting.com/2024/03/15/an-open-source-diy-flow-ba...
danielfp248 153 days ago [-]
I am the author of the blog. The Zn/I chemistry actually generates very little H2, so that's not a problem in our current configuration.
thanks! so the rest of the thread here is sort of beside the point
jhayward 154 days ago [-]
Your local fire department will want to very closely inspect your explosive materials handling and safety procedures. Think about what big banks of lead-acid batteries have to do, and google the pictures of battery rooms with their roof blown to bits.
kragen 154 days ago [-]
i'm familiar with the destructive power and unpredictable nature of hydrogen detonations, yes ;)
but that's what happens when you don't vent the hydrogen to the atmosphere
Qwertious 154 days ago [-]
Yes, but improperly venting the hydrogen is "not venting hydrogen" but looks like venting the hydrogen unless closely inspected.
kragen 154 days ago [-]
you can do it in ways that are really obvious, though only to someone who knows the order of magnitude of hydrogen that could be produced
danielfp248 153 days ago [-]
We hope to go from these low cost kits to home kits, to commercial kits. Out technology will always be open source. We hear you and we want to get there. We definitely want to live good lives - and have those who work with us have good lives too - but we really don't care about being rich.
We are going to start a work coop soon to build and sell the educational kits, as soon as we finish with the initial development. We also have a Hardware X paper coming, showing the initial results of the DIY kit. Things are slowly coming together, but it takes a while since we're literally doing these experiments in our houses.
kirksmith 154 days ago [-]
I agree... part of that frustration is why we're working on this project! See my short post on "Why you can't buy a flow battery today"
I dont know anything about flow batteries, but some quick searching leads me to believe that there are two tanks of electrolytes with pumps that pump them along a membrane and then you get power across the membrane. In this small battery kit, is the idea that the battery provides enough power to both operate all its own pumps/electronics, and then output usable power? Does anyone know how much power you'd be able to get out of a small setup like this?
Looks like a cool project!
hosh 154 days ago [-]
Flow batteries have some fantastic properties. Their energy output and capacity can be scaled independently. They are safer and can be made from material that are easier to source.
They are also have high upfront costs and poor energy density, so there have not been much application outside of grid-scale deployments. Getting something practical for onsite commercial, residential, and vehicular applications have been something aggressively pursued. (Solid-state batteries being another battery tech that is also pursued).
So for someone to make a open-source DIY flow battery that can scale well can change a lot of things.
Thanks! This kit is for R&D and educational purposes only, because of the use of positive displacement pumps (peristaltic, diaphragm, etc) instead of centrifugal pumps, it will never be able to effectively work as a battery since the pumping energy cost is high.
Once we have materials and electrolytes validated with the kit, we plan to move to a much larger cell size which will be part of a flow battery stack, which would actually function as a battery for useful storage.
jillesvangurp 154 days ago [-]
The cool thing with flow batteries is that you can scale the amount of power they store (kwh) by simply using bigger tanks. The power output (kw) you get out of them is determined by the size and efficiency of the anode and cathode.
So, in this case both are a bit underwhelming obviously. But the main point is that you can increase the kwh by simply using bigger tanks and the kw by using multiple cells in parallel or by improving the anode/cathode somehow.
lo0dot0 153 days ago [-]
What are possible dangers ? I am thinking that any potential sudden release of energy would make placement in urban areas unsafe.
moffkalast 154 days ago [-]
Definitely looks like a great idea, fuel cells with something that doesn't outright explode if you look at it wrong. The shortcoming would be the energy density I would expect. But even so if there's something that can maybe be half as good as lithium but can be refuelled in seconds by just filling up a tank there's definitely a market for it.
riiii 154 days ago [-]
It would be helpful to start the article with a link to why flow batteries are amazing.
I cannot see how this is useful outside of being a fun student learning program.
From the data it appears a battery with 1L of electrolyte provides about 18Wh of energy. Mind you this is at ~1.2V, which isn't especially useful without a boost converter. With a boost converter though you would need a low internal impedance from the battery, which I highly doubt is any good with a paper membrane (from what I understand it already isn't great for flow batteries).
Meanwhile a pair of 18650 lithium ion batteries can be had for $5 and can provide 24Wh at a very usable 7V with no power conditioning or a range of voltages with more than enough ability to source current. And it is a fraction the size, weight, and complexity.
I don't mean to tear apart the project, perhaps there is a key detail I am missing, but I just don't see what this is trying to do outside being a learning experience for students.
msandford 154 days ago [-]
Typically if you want to DIY something you first start with the smallest prototype possible and work your way up from there.
This demo cell isn't super interesting on its own but to validate the chemistry it's super helpful. Once you got that done you'd then work on a stack of cells, say 10 or 20 or 40 to get up to normal system voltages.
Once you have that working it's just a matter of making the tank as big as you want for your storage. Provided the initial chemistry is reasonable you could probably use a pair of IBC totes and really go somewhere.
Gravityloss 154 days ago [-]
Yeah! The thing about flow batteries is that if we manage to find good chemistries, they have the potential to be very cheap energy storage compared to ordinary batteries. High energy, low power, low cost.
Ie the small electrodes cost something but the big bag of fluid might be cheap.
Say, vitamin- like substances consisting of extremely common elements like hydrogen, oxygen, nitrogen, carbon etc could be used to store energy in a flow battery. Even with quite low performance, they could be very cheap compared to things like cobalt, nickel, manganese or lithium.
Or what about quinones? And sodium, sulphur, sodium are cheap too. There are a lot of very cheap chemistries that could be explored!
kirksmith 153 days ago [-]
Bingo, this is exactly the plan. Of course there are non-trivial engineering challenges when scaling up, but that's the rough idea.
marcosdumay 154 days ago [-]
You are missing that this is just some salts dissolved in water, while the 18650 is a highly complex device.
How much does it cost to store 10m^3 of water? And hos much does it cost to store the same energy in 18650 batteries?
Also, the internal resistance depends entirely on how many cells you have. But a practical battery wouldn't use paper.
Workaccount2 154 days ago [-]
>Also, the internal resistance depends entirely on how many cells you have.
Right, from the one study I can find, commercial flow batteries have about 10-20x the internal resistance of a lithium ion battery, so the match the power and energy capabilities of a single li-ion cell you would need a liter of electrolyte and about 30 (!) cells (3 for voltage x 10 for power).
And that is for a commercial quality flow battery. And lithium ion batteries are wholesale in the $2 a piece range.
I'm not trying to say flow batteries are stupid or dumb, but their use cases are going to be very limited without some huge breakthroughs that will probably dramatically increase the complexity too.
mschuster91 154 days ago [-]
> I'm not trying to say flow batteries are stupid or dumb, but their use cases are going to be very limited without some huge breakthroughs that will probably dramatically increase the complexity too.
The largest use case is going to be grid scale storage, and for that one a bunch of dumb tanks and a bank of cells are far easier to handle and less risky than a bunch of li-ion cells that can go into runaway for whatever reason.
Workaccount2 154 days ago [-]
The thing is that there are like 50 other options for energy storage, it's not just lithium-ion that flow batteries have to out compete. Everything from electrolyzed hydrogen, to hot sand, to air pressure tanks, to sodium-ion and zinc air and LiFePo batteries.
Flow batteries are cool because the storage element is extremely easy to scale. But its not even that great because you also need to scale the amount of cells dramatically to make it useful outside of edge cases. At which point it probably makes more sense to just use another storage mechanism.
entropicdrifter 154 days ago [-]
Their use cases would become extremely relevant to people trying to rebuild society from scratch, I'd imagine. This device is so simple you could probably build one in the woods with nothing but a basic survival kit given a year or two alone.
So that's something. Learning how to build one from scratch seems worthwhile, much like learning to build a radio from scratch
Dylan16807 154 days ago [-]
Unless you're flying a drone, you don't need to match the power and energy capabilities of lithium ion.
On top of that, you don't have to match the internal resistance to match power. If you have plenty of material to absorb the heat, then you can tolerate more percentage points of loss.
In particular, while lithium ion batteries can be built to sacrifice discharge rate for a bit of extra capacity, something like a 3C discharge rate is easy enough to reach. And if your use case is powering a building for several hours, you might only need a .2C discharge rate. That would mean lithium ion as a technology is 15x overqualified, and a flow battery that gives you 10x less power would still be overqualified.
Workaccount2 154 days ago [-]
I see what you are saying, in reality the right energy storage is very application dependent. The crux of my argument is that I cannot think of many applications where a commercial grade flow battery is the best choice, much less a single application where a DIY flow battery is the best choice.
Dylan16807 154 days ago [-]
My main point is that while it definitely has to compete on price, it doesn't have to compete on price while also making you buy ten times as many cells.
Many elements of being the "best choice" are thresholds. Excess performance doesn't make it better. Price is extremely important, but power density is not so important for most use cases. So if it's even slightly cheaper, expect to see a lot of it.
taneq 154 days ago [-]
> application where a DIY flow battery is the best choice
Christmas present for a battery enthusiast? :D
BobaFloutist 153 days ago [-]
>The crux of my argument is that I cannot think of many applications where a commercial grade flow battery is the best choice
I think the argument against that is that we've spent tens of thousands of person-hours a millions of dollars more researching, developing, improving, and refining lithium-ion batteries than we have flow-batteries, and the purpose of the project in OP is to make it easier to tinker with flow-batteries.
Think of how much better lithium-ion batteries have gotten since we first started using them. We went from "You simply cannot achieve the energy density to propel (tethered) cars without fossil fuels" to "Oh wait we have electric cars now." in like a decade, and in the decade since them, lithium ion batteries have improved in every metric by at least an order of magnitude. We simply don't know how good flow-batteries can get, because we haven't tried, and it's silly to say "why bother trying, they're not very good right now" when we've just seen how much of a difference it makes to invest into this sort of technology.
Retric 154 days ago [-]
1 liter of electrolyte is nothing for a flow battery, the smallest scale they become a serious competitor is ~10m3 (10,000L) tanks which are ~(7 foot X 7 foot X 7 foot).
Start taking GWh of storage and lithium ion technology gets really expensive and has a lot of associated risks. Flow batteries on the other hand don’t need to worry about a single cell failure resulting in a fire which then spreads.
Workaccount2 154 days ago [-]
The amount of electrolyte doesn't scale the available power though, only the available energy.
Retric 154 days ago [-]
That just means you get to scale it independently.
While they both need to scale the amount of DC<>AC inverters based on peak power demand. If you want to discharge over 16 hours you’re using 2% of lithium ion’s peak power output and need a huge mess of wiring to move power from each internal cell to that inverter + complex battery packs with individual electronics cooling etc.
Flow batteries on the other hand can use a single pump (+ redundancy) and fat pipe to supply a huge array of ion-exchange membranes which then sit next to the inverters.
almostnormal 154 days ago [-]
Energy storage is the problem that needs a solution, e.g., storage from summer to winter.
jhayward 154 days ago [-]
Seasonal energy storage is the last thing that needs to be addressed in the storage hierarchy. There are very high-value targets starting on very low time frames.
BobaFloutist 153 days ago [-]
Seasonal energy storage is the last thing, but that also means it's the last caveat, as far as I can tell. If we figure out seasonal energy storage, that's it. Solar just wins. There's no further need for fossil fuels. We're done.
I guess there's still aircraft.
marcosdumay 154 days ago [-]
Annual and long-tail storage are both problems that need solving, and fuel cells do look like a possible solution. But it's not clear at all what the winner will be for those applications.
Even hydrogen is competitive here. IMO, more competitive than that battery chemistry on the article.
pfdietz 154 days ago [-]
Fuel cells are a possible solution (especially if one can build a dual mode electrolyzer/fuel cell), but combined cycle power plants burning hydrogen would also work, if only at very large scale (but then economical hydrogen storage likely requires large scale).
EricE 154 days ago [-]
A flow battery isn't going to burst into extremely high temperature flames in a self-sustaining not easily extinguishable fire that also spews toxic fumes in mass quantities.
I'll take a basement (or garage) with a flow battery over lithium ion ANY day of the week if I want battery backup for my house.
rootusrootus 154 days ago [-]
You would not use a laptop-style lithium battery for battery backup for your home. You would use LFP. It does not have the burst-into-flame problem you are thinking of.
At some point I expect we will look back at the era when we used really flammable electrolytes and laugh about how wild that was. I bet we are not that far from it being just a memory.
avhon1 154 days ago [-]
PowerWalls use NMC cells. And the majority of "diy powerwall" builds are reclaimed 18650 cells.
rootusrootus 153 days ago [-]
There's been a rumor for a while that Powerwall 3 is LFP, but I don't think anyone has actual confirmation on that.
I've seen occasional 18650 builds for DIY powerwalls but the vast majority are using prismatic LFP cells. Way easier to wire up, cheaper (unless you have a secret source for surplus 18650s), and minimal fire risk.
BobaFloutist 153 days ago [-]
As someone completely ignorant in the field, my impression is that the point of this is to create something that relative amateurs (or research professionals on a budget) can use to tinker with various chemistries to achieve those huge breakthroughs (that we keep seeing in every other kind of battery, because it turns out batteries have a lot of room for breakthroughs).
heeton 154 days ago [-]
Not a battery expert, but this seems the right ballpark for useful batteries.
Back of envelope stuff:
1liter for 18Wh.
1k liter 18KWh (this is an average hot tub).
10k litre for 180Kwh. This is a ~$1000 farming tank.
~100KWh lithium batteries are around the $20-30k. (Used Tesla pack for reference)
Quick google shows flow electrolyte in the neighbourhood of $100 per KWh. Or $10k for a ~100KWh battery.
All this is nothing definitive, but it’s not showing any 10x or 100x differences that would rule out an interesting idea.
rootusrootus 154 days ago [-]
> ~100KWh lithium batteries are around the $20-30k. (Used Tesla pack for reference)
Nitpick: that seems high, and probably very specific to high capacity Model S packs. A brand new 75kWh Tesla pack for a Model 3 is around $10K installed these days.
Workaccount2 154 days ago [-]
In order to really make a determination though you need to know what the internal resistance characteristics looks like.
18kWh becomes near useless if it can only source enough current to power your TV at any given time. Or to put that another way: 18kWh doesn't do you much good if you can only draw 200W from it at a time.
Given that flow batteries are known for their virtually zero self-discharge, and this project is aiming for a cheap/easy membrane, it seems very likely that internal impedance will kill most use cases here.
Mind you I don't think flow batteries themselves are useless to pursue. It's just that I believe a viable flow battery is almost certainly going to be something that requires complex chemistries and advanced manufacturing. In the same way you can build an open source EV from scratch, but you really wouldn't want to ever take that thing on the street.
ajford 154 days ago [-]
Why wouldn't you take a scratch-build EV on the road? People build kit-cars all the time, and an EV has a much simpler control system.
This is a very simplified project to prove the concept and provide a test bed for further exploration, not an end-product by any stretch. This seems like the perfect project to test various membranes and electrolyte solutions.
Workaccount2 154 days ago [-]
>Why wouldn't you take a scratch-build EV on the road?
Because you don't want to snap your spine in a minor fender bender.
Scratch built is not the same thing as an EV conversion kit, where all the hard stuff (like a frame and body panels) was already made by commercial manufacturers.
This flow battery is from scratch (well except for the pumps and electronics, but the cell itself is). They are not using off the shelf electrolyte and electrochemical cells like a flow battery kit would.
It's a neat project and would teach a lot, but I just cannot find a scenario in my head where I would want this (even a scaled up version) over another solution.
avhon1 154 days ago [-]
Every other year, (solar-)electric cars scratch-built by high school students drive on public roads from Texas to (usually) California. This is considered a reasonable level of challenge, and something which insurers will cover (entrants are required to have vehicle liability insurance).
Or from Darwin to Adelaide in Austrlia, where they have road trains to contend with. DIYing cars is very doable.
Workaccount2 153 days ago [-]
And you would daily drive one of those?
You would be ok getting into an accident with one the same as you would get in an accident driving a civic?
Or maybe those are just learning vehicles meant to teach, and not meant to be car replacements? Just like this flow battery project?
Ironically your post validates my whole point: This is a student project at best, and likely worthless as a "democratization of energy storage". The same way those EV's would never be considered "democratization of EV cars".
C'mon...
kirksmith 153 days ago [-]
I take your criticism, but as for your comment that it's "a student project at best"... we do have PhDs (mine in flow batteries !) and manage this project in our spare time, at our homes...
Our small team is fully qualified to work at any flow battery company. Just give us some time and let us work on it full-time for a bit (which will happen soon). The linked post on top was a blogpost I cranked out in a few minutes one night, not something I ever expected to be on HN.
KennyBlanken 154 days ago [-]
Flow batteries are optimized for cost and capacity. Not weight, nor volume/energy density, nor instantaneous power delivery. In the case of some iron flow designs, add in "dirt-cheap, non-toxic materials."
A pair of 55 gallon drums equals 7.4kWh, and I'm guessing a lot of us could easily find that much space in our basements. That's enough to power 300W of load 24x7 (a modern fridge is about 60W. 100W will get you really far in terms of LED lighting given that most "60W" bulbs are well under 10W these days.)
One "car battery" sized LiFePO4 battery is about 1400Wh, and costs anywhere from $100 to $500+ depending on the manufacturer/reseller.
I'm a little mystified why they didn't go with a simpler iron-flow design as it is very cheap, and can be nearly completely non-toxic.
pfdietz 154 days ago [-]
The actor I'm mildly paying attention to is Lockheed-Martin, who have an energy systems group that's working on flow batteries. Judging by patents, their flow battery likely uses various transition element ions that are kept in solution with any of a variety of organic ligands. The wide variety of chemistries is the attractive part, since they present many knobs to twiddle for optimization.
kirksmith 153 days ago [-]
Iron plating is a hydrogen evolution nightmare. It's interesting for sure, but not feasible for a simple demonstration system, due to pH issues and oxidation state drift from hydrogen evolution. We do plan to explore it in the future, and move onto larger cells/stacks that offer practical amounts of storage.
ForOldHack 154 days ago [-]
There are two key details you are missing:
1) Its scalable to dishwasher size, ( enough to power a tiny house )
2) If you shot it with a bullet, it would just leak salt water. That is all.
Lithium Ion will explode:
Now here is the quiz: If you have a cell phone that is inflating, do you A) Dunk it in water? or B) Toss it in a full document safe? or c) Quickly empty your document safe, and toss it in?
If a flow battery leaks, you can toss in a chicken into the delightful brine.
Since you cannot scale this easily to Utility sized batteries easily, the D.O.E. is not interested. i.e. if you are looking to scale this to a couple of hundred megawatts, just stop reading and thinking about this now. This is NOT mobile. Its not useful for cars or cities. Its right sized for homes.
0cf8612b2e1e 154 days ago [-]
… if you are looking to scale this to a couple of hundred megawatts, just stop reading and thinking about this now
I thought that was one huge appeal of flow batteries is that you can basically infinitely scale them. China has a 100MW installation (potentially more since this 2022 report)
"But that's not what happened. Instead of the batteries becoming the next great American success story, the warehouse is now shuttered and empty. All the employees who worked there were laid off. And more than 5,200 miles away, a Chinese company is hard at work making the batteries in Dalian, China.
The Chinese company didn't steal this technology. It was given to them — by the U.S. Department of Energy. First in 2017, as part of a sublicense, and later, in 2021, as part of a license transfer."
These guys in the US make a 500kwh version, that can run at 75kw of discharge power across 3 phases, and its a single shipping container: https://essinc.com/energy-warehouse/
It doesn't seem like it would take up that much space to have 200 shipping containers sitting somewhere, i'm pretty sure the Home Depot distrubution center in our town already is close to that in their parking lot (yes, you would want them not on wheels, and farther apart)
0cf8612b2e1e 154 days ago [-]
That’s incredible. I wonder what are the costs relative to a grid scale battery of equivalent size.
I only wish they made one that were barrel sized and fit for consumers. Worst case, you have a leak vs a home battery fire.
rootusrootus 154 days ago [-]
> Worst case, you have a leak vs a home battery fire.
Battery fires are an EV (and then, only certain models) and laptop/phone thing. Only a few home batteries use the really flammable electrolytes (mostly Tesla Powerwalls, I'd bet). Most people are using LFP for home, which is less expensive and doesn't have the fire problem.
thebruce87m 149 days ago [-]
> Explode
Not all Lithium Ion chemistries react this way. LFP does not explode:
"For some scientists doing flow battery experiments in their respective homes/apartments, we’ve got some solid preliminary results"
Obviously it's a research project not a commercial product. What do you expect?
Tade0 154 days ago [-]
Personally I would find it useful for applications where there needs to be little to no self-discharge and fire safety - like a remote shed with some kind of sensor.
Workaccount2 154 days ago [-]
You still need something to power the pumps. And we already have long term low power batteries. And solar + battery has filled this role for decades.
kirksmith 153 days ago [-]
The pumping cost constitutes a 1-2% total penalty on round-trip energy efficiency for a well-designed flow battery.
K0balt 154 days ago [-]
This is awesome!
Obviously we’d need a real ion exchange membrane and put 40 of them in series, but it looks pretty scalable even in its present form. This looks very practical to me, once a few more years of tinkering is done.
I’d love to have more information about electrode fluid cost, life and reconditioning/reprocessing, as well as power densities for membrane area.
I’d love to be able to add capacity just by adding tanks and electrode fluid! For microgrids like ours, this is a longstanding goal.
gwbas1c 154 days ago [-]
> I just don't see what this is trying to do outside being a learning experience for students.
Perhaps one of those students will figure out how to make a useful large scale flow battery? I have solar, and the missing piece is being able to store electricity for the winter.
Perhaps the person who figures it out learned something from a project like this?
beAbU 154 days ago [-]
This website is called hacker news. I think you are missing the point of this post.
culopatin 153 days ago [-]
Can this be combined with uphill water storage so you store both kinetic and chemical energy? The pump would store water uphill as it does now, but when it flows down it goes through the membrane and also generates power this way? Of course it robs some of the momentum used for the turbines but idk, maybe it’s more efficient?
rini17 153 days ago [-]
Uphill water storage has little energy density, you need huge reservoir to get useful amounts of energy.
culopatin 153 days ago [-]
Ok, and?
rini17 153 days ago [-]
And it means extracting the kinetic energy in this scenario is not worth it, you won't recoup the cost of turbine. Only advantage of placing electrolyte above the cell might be that you don't need to pump it when discharging, only when charging.
mikewarot 154 days ago [-]
It's my understanding that iodine is one of those things watched very closely by the TLAs enforcing prohibition. Be careful, lest you end up unable to move about freely because this gets you on a list.
sterlind 154 days ago [-]
Iodine used to be commonly used to reduce pseudoephedrine to meth, but these days most meth comes from superlabs in Mexico, who use a very different process. I doubt you'll catch much heat for it these days, especially since it has a number of legit uses. And even if it gets you on a "list" you're more likely to just get raided once rather than no-fly'd.
kirksmith 154 days ago [-]
We are planning other electrolytes beyond zinc-iodine (including iron salts), but this one happens to be practical for getting started due to widespread availability, tolerance to oxygen (avoiding requirements of purging with inert gas), and low hydrogen evolution rates (quite unlike iron-salt systems, which are practically H2 electrolyzers!).
pfdietz 154 days ago [-]
Iodine is also pretty expensive ($61/kg in 2023) so this doesn't seem scalable for that reason alone.
kleton 154 days ago [-]
What is the Coulombic efficiency? A paper membrane probably leaks a lot, but a state of the art ion exchange membrane probably runs $1k/m2.
danielfp248 153 days ago [-]
I am the author of the blog (chemisting.com), working on the project with Kirk and Josh.
The Coulomb efficiency of a device with a microporous, non-selective membrane depends fundamentally on how fast you charge/discharge it, as the device self-discharges while it runs. The faster you charge/discharge, the higher the CE will be.
In the case of the photopaper device, it will be in the 85-90% range when charging to high SOC values at 20mA/cm2. The big advantage is that microporous membranes are really cheap and they still work even if dendrites pierce them. I must me clear that photopaper is meant as a DIY demonstration, a commercial unit would never use that but a polyethylene microporous separator - such as Daramic - with these memrbanes the CE and EE tend to be higher.
KennyBlanken 154 days ago [-]
It's in the blog. The author mentions finding that matte inkjet paper worked fairly well.
There are much cheaper membranes; ESS for example uses a membrane that is used by lithium ion batteries (I think) and thus is commonly available and very inexpensive.
if by 'the blog' you (or you and kennyblanken) mean https://chemisting.com/, which post do you mean? the post you link to in that blog doesn't say anything about coulombic efficiency or inkjet paper, and there are four years of posts in the blog
Hi! Just to say that Symantec doen not like your website!
Malicious Site Blocked!
Symantec Endpoint Protection blocked this website:
https://dualpower.supply/
happymellon 154 days ago [-]
The solution is to avoid using Symantec.
Perhaps report this issue to your malware provider rather than the site owner?
GTP 153 days ago [-]
Malware provider sounds like someone distributing malware :D
kirksmith 154 days ago [-]
Yeah I am self-hosting with a VPN and following all the best practices I know (not my expertise), not surprised there's some warnings going around.
Rendered at 01:20:40 GMT+0000 (UTC) with Wasmer Edge.
Currently reading through these posts, feel free to ask questions. Great to see interest.
FYI, I am quitting my postdoc job in two months to work on this full-time, which should help the rate of progress, but my main source of income will stop. We hav ea small but it will only cover a few months of full-time work.
If you want to support the project financially we have an Open Collective here: https://opencollective.com/fbrc/donate
We'd really appreciate any support you're able to give, which we'll use to push this open technology as far as we can! We are planning to start work on a much bigger stack after the kit.
Question: What happens to the liquids once they have been used up and depleted? Is there a "recharge" procedure? If they can be reused, how many times before they become disposal waste?
The liquids are reusable, and are charged and discharged repeatedly without needing to replace the fluids. In other words the system is closed with respect to mass, only electrical energy (and minor amounts of thermal) are transferred in and out, reversibly. Flow batteries are similar to so-called reversible or regenerative fuel cells for this reason.
The answer to how long it lasts depends on many factors, and we hope to provide a clearer picture of that in our work.
In a well-designed system, they can last extremely long in comparison to, say, lithium-ion batteries. This is because flow batteries have different degradation pathways that are less severe and, if present, can usually be overcome through other solutions (e.g. electrolyte rebalancing, see ESS's "proton pump").
I was at a tiny house competition, and we were using golf cart batteries, and the winner: The University of Santa Clara, CA:
"The house stores its energy using saltwater batteries, the only batteries in the world to be Cradle to Cradle certified."
https://www.tinyhousebasics.com/revolve/
They are still busy patent trolling today.
The technology looks great, but they seem annoyingly incompetent at marketing/selling their product...or are just holding out for "whale" customers, refusing to work with anyone except microgrid (ie college campus) and utility scale customers.
So many promising products and technologies die because the inventors/developers hold out for huge customers while ignoring the huge demand from retail/small/medium corp customers.
"We won't talk to anyone except corporations with deep pockets. Once we find a couple of those, we'll be filthy stinking rich!" instead of "if we sell the components at a price that undercuts LiFePO4, we'll have as many customers as we can handle, and there's plenty of margin for distributors and retailers, so we don't have to be B2C."
For example by just working with a handful of customers. Or by building a tiny factory that merely prove technical feasibility instead of a bigger one that would prove the business case as well as the technology benefits in terms of cost. Big battery factories are expensive and risky. And most battery tech doesn't really get profitable until you have a big factory and a few years of optimization. The price of the first batteries is generally really high and it can take years to get there.
This has been a problem with battery tech in particular where mostly companies in the US or Europe don't get much funding for new tech and where China actually seems to be doing a bit better. Which is why sodium batteries are shipping in China (CATL) and sort of stuck in R&D for many years elsewhere.
With flow batteries, the technology is kind of proven at this point. They work, they exist, etc. What's left to prove is the price point: can it be done cheaply? Everything seems to suggest yes. But proving that is going to require scaling production and a massive amount of investment to get that going. Think billions, not millions.
Small retail customers are not helpful here because those don't pay until after the factory gets built and starts shipping product. Demand is never the issue. It's doing the leg work to get to the promised price point at which that demand exists. That requires investment.
but that's what happens when you don't vent the hydrogen to the atmosphere
We are going to start a work coop soon to build and sell the educational kits, as soon as we finish with the initial development. We also have a Hardware X paper coming, showing the initial results of the DIY kit. Things are slowly coming together, but it takes a while since we're literally doing these experiments in our houses.
https://dualpower.supply/posts/motivation-OSHW-RFB/
Looks like a cool project!
They are also have high upfront costs and poor energy density, so there have not been much application outside of grid-scale deployments. Getting something practical for onsite commercial, residential, and vehicular applications have been something aggressively pursued. (Solid-state batteries being another battery tech that is also pursued).
So for someone to make a open-source DIY flow battery that can scale well can change a lot of things.
https://www.wevolver.com/article/what-is-a-flow-battery-a-co...
Once we have materials and electrolytes validated with the kit, we plan to move to a much larger cell size which will be part of a flow battery stack, which would actually function as a battery for useful storage.
So, in this case both are a bit underwhelming obviously. But the main point is that you can increase the kwh by simply using bigger tanks and the kw by using multiple cells in parallel or by improving the anode/cathode somehow.
From the data it appears a battery with 1L of electrolyte provides about 18Wh of energy. Mind you this is at ~1.2V, which isn't especially useful without a boost converter. With a boost converter though you would need a low internal impedance from the battery, which I highly doubt is any good with a paper membrane (from what I understand it already isn't great for flow batteries).
Meanwhile a pair of 18650 lithium ion batteries can be had for $5 and can provide 24Wh at a very usable 7V with no power conditioning or a range of voltages with more than enough ability to source current. And it is a fraction the size, weight, and complexity.
I don't mean to tear apart the project, perhaps there is a key detail I am missing, but I just don't see what this is trying to do outside being a learning experience for students.
This demo cell isn't super interesting on its own but to validate the chemistry it's super helpful. Once you got that done you'd then work on a stack of cells, say 10 or 20 or 40 to get up to normal system voltages.
Once you have that working it's just a matter of making the tank as big as you want for your storage. Provided the initial chemistry is reasonable you could probably use a pair of IBC totes and really go somewhere.
Ie the small electrodes cost something but the big bag of fluid might be cheap.
Say, vitamin- like substances consisting of extremely common elements like hydrogen, oxygen, nitrogen, carbon etc could be used to store energy in a flow battery. Even with quite low performance, they could be very cheap compared to things like cobalt, nickel, manganese or lithium.
Or what about quinones? And sodium, sulphur, sodium are cheap too. There are a lot of very cheap chemistries that could be explored!
How much does it cost to store 10m^3 of water? And hos much does it cost to store the same energy in 18650 batteries?
Also, the internal resistance depends entirely on how many cells you have. But a practical battery wouldn't use paper.
Right, from the one study I can find, commercial flow batteries have about 10-20x the internal resistance of a lithium ion battery, so the match the power and energy capabilities of a single li-ion cell you would need a liter of electrolyte and about 30 (!) cells (3 for voltage x 10 for power).
And that is for a commercial quality flow battery. And lithium ion batteries are wholesale in the $2 a piece range.
I'm not trying to say flow batteries are stupid or dumb, but their use cases are going to be very limited without some huge breakthroughs that will probably dramatically increase the complexity too.
The largest use case is going to be grid scale storage, and for that one a bunch of dumb tanks and a bank of cells are far easier to handle and less risky than a bunch of li-ion cells that can go into runaway for whatever reason.
Flow batteries are cool because the storage element is extremely easy to scale. But its not even that great because you also need to scale the amount of cells dramatically to make it useful outside of edge cases. At which point it probably makes more sense to just use another storage mechanism.
So that's something. Learning how to build one from scratch seems worthwhile, much like learning to build a radio from scratch
On top of that, you don't have to match the internal resistance to match power. If you have plenty of material to absorb the heat, then you can tolerate more percentage points of loss.
In particular, while lithium ion batteries can be built to sacrifice discharge rate for a bit of extra capacity, something like a 3C discharge rate is easy enough to reach. And if your use case is powering a building for several hours, you might only need a .2C discharge rate. That would mean lithium ion as a technology is 15x overqualified, and a flow battery that gives you 10x less power would still be overqualified.
Many elements of being the "best choice" are thresholds. Excess performance doesn't make it better. Price is extremely important, but power density is not so important for most use cases. So if it's even slightly cheaper, expect to see a lot of it.
Christmas present for a battery enthusiast? :D
I think the argument against that is that we've spent tens of thousands of person-hours a millions of dollars more researching, developing, improving, and refining lithium-ion batteries than we have flow-batteries, and the purpose of the project in OP is to make it easier to tinker with flow-batteries.
Think of how much better lithium-ion batteries have gotten since we first started using them. We went from "You simply cannot achieve the energy density to propel (tethered) cars without fossil fuels" to "Oh wait we have electric cars now." in like a decade, and in the decade since them, lithium ion batteries have improved in every metric by at least an order of magnitude. We simply don't know how good flow-batteries can get, because we haven't tried, and it's silly to say "why bother trying, they're not very good right now" when we've just seen how much of a difference it makes to invest into this sort of technology.
Start taking GWh of storage and lithium ion technology gets really expensive and has a lot of associated risks. Flow batteries on the other hand don’t need to worry about a single cell failure resulting in a fire which then spreads.
While they both need to scale the amount of DC<>AC inverters based on peak power demand. If you want to discharge over 16 hours you’re using 2% of lithium ion’s peak power output and need a huge mess of wiring to move power from each internal cell to that inverter + complex battery packs with individual electronics cooling etc.
Flow batteries on the other hand can use a single pump (+ redundancy) and fat pipe to supply a huge array of ion-exchange membranes which then sit next to the inverters.
I guess there's still aircraft.
Even hydrogen is competitive here. IMO, more competitive than that battery chemistry on the article.
I'll take a basement (or garage) with a flow battery over lithium ion ANY day of the week if I want battery backup for my house.
At some point I expect we will look back at the era when we used really flammable electrolytes and laugh about how wild that was. I bet we are not that far from it being just a memory.
I've seen occasional 18650 builds for DIY powerwalls but the vast majority are using prismatic LFP cells. Way easier to wire up, cheaper (unless you have a secret source for surplus 18650s), and minimal fire risk.
Back of envelope stuff:
1liter for 18Wh.
1k liter 18KWh (this is an average hot tub).
10k litre for 180Kwh. This is a ~$1000 farming tank.
~100KWh lithium batteries are around the $20-30k. (Used Tesla pack for reference)
Quick google shows flow electrolyte in the neighbourhood of $100 per KWh. Or $10k for a ~100KWh battery.
All this is nothing definitive, but it’s not showing any 10x or 100x differences that would rule out an interesting idea.
Nitpick: that seems high, and probably very specific to high capacity Model S packs. A brand new 75kWh Tesla pack for a Model 3 is around $10K installed these days.
18kWh becomes near useless if it can only source enough current to power your TV at any given time. Or to put that another way: 18kWh doesn't do you much good if you can only draw 200W from it at a time.
Given that flow batteries are known for their virtually zero self-discharge, and this project is aiming for a cheap/easy membrane, it seems very likely that internal impedance will kill most use cases here.
Mind you I don't think flow batteries themselves are useless to pursue. It's just that I believe a viable flow battery is almost certainly going to be something that requires complex chemistries and advanced manufacturing. In the same way you can build an open source EV from scratch, but you really wouldn't want to ever take that thing on the street.
This is a very simplified project to prove the concept and provide a test bed for further exploration, not an end-product by any stretch. This seems like the perfect project to test various membranes and electrolyte solutions.
Because you don't want to snap your spine in a minor fender bender.
Scratch built is not the same thing as an EV conversion kit, where all the hard stuff (like a frame and body panels) was already made by commercial manufacturers.
This flow battery is from scratch (well except for the pumps and electronics, but the cell itself is). They are not using off the shelf electrolyte and electrochemical cells like a flow battery kit would.
It's a neat project and would teach a lot, but I just cannot find a scenario in my head where I would want this (even a scaled up version) over another solution.
https://www.solarcarchallenge.org/challenge/about.shtml
https://www.solarcarchallenge.org/challenge/docs/rules2023.p...
You would be ok getting into an accident with one the same as you would get in an accident driving a civic?
Or maybe those are just learning vehicles meant to teach, and not meant to be car replacements? Just like this flow battery project?
Ironically your post validates my whole point: This is a student project at best, and likely worthless as a "democratization of energy storage". The same way those EV's would never be considered "democratization of EV cars".
C'mon...
Our small team is fully qualified to work at any flow battery company. Just give us some time and let us work on it full-time for a bit (which will happen soon). The linked post on top was a blogpost I cranked out in a few minutes one night, not something I ever expected to be on HN.
A pair of 55 gallon drums equals 7.4kWh, and I'm guessing a lot of us could easily find that much space in our basements. That's enough to power 300W of load 24x7 (a modern fridge is about 60W. 100W will get you really far in terms of LED lighting given that most "60W" bulbs are well under 10W these days.)
One "car battery" sized LiFePO4 battery is about 1400Wh, and costs anywhere from $100 to $500+ depending on the manufacturer/reseller.
I'm a little mystified why they didn't go with a simpler iron-flow design as it is very cheap, and can be nearly completely non-toxic.
1) Its scalable to dishwasher size, ( enough to power a tiny house )
2) If you shot it with a bullet, it would just leak salt water. That is all. Lithium Ion will explode:
Now here is the quiz: If you have a cell phone that is inflating, do you A) Dunk it in water? or B) Toss it in a full document safe? or c) Quickly empty your document safe, and toss it in?
If a flow battery leaks, you can toss in a chicken into the delightful brine.
Since you cannot scale this easily to Utility sized batteries easily, the D.O.E. is not interested. i.e. if you are looking to scale this to a couple of hundred megawatts, just stop reading and thinking about this now. This is NOT mobile. Its not useful for cars or cities. Its right sized for homes.
https://www.pv-magazine.com/2022/09/29/china-connects-worlds...
The Chinese company didn't steal this technology. It was given to them — by the U.S. Department of Energy. First in 2017, as part of a sublicense, and later, in 2021, as part of a license transfer."
https://www.npr.org/2022/08/03/1114964240/new-battery-techno...
It doesn't seem like it would take up that much space to have 200 shipping containers sitting somewhere, i'm pretty sure the Home Depot distrubution center in our town already is close to that in their parking lot (yes, you would want them not on wheels, and farther apart)
I only wish they made one that were barrel sized and fit for consumers. Worst case, you have a leak vs a home battery fire.
Battery fires are an EV (and then, only certain models) and laptop/phone thing. Only a few home batteries use the really flammable electrolytes (mostly Tesla Powerwalls, I'd bet). Most people are using LFP for home, which is less expensive and doesn't have the fire problem.
Not all Lithium Ion chemistries react this way. LFP does not explode:
https://youtu.be/D8xNjz73p80?si=LA4iGdI6sTJ_C9kJ
Obviously it's a research project not a commercial product. What do you expect?
Obviously we’d need a real ion exchange membrane and put 40 of them in series, but it looks pretty scalable even in its present form. This looks very practical to me, once a few more years of tinkering is done.
I’d love to have more information about electrode fluid cost, life and reconditioning/reprocessing, as well as power densities for membrane area.
I’d love to be able to add capacity just by adding tanks and electrode fluid! For microgrids like ours, this is a longstanding goal.
Perhaps one of those students will figure out how to make a useful large scale flow battery? I have solar, and the missing piece is being able to store electricity for the winter.
Perhaps the person who figures it out learned something from a project like this?
The Coulomb efficiency of a device with a microporous, non-selective membrane depends fundamentally on how fast you charge/discharge it, as the device self-discharges while it runs. The faster you charge/discharge, the higher the CE will be.
In the case of the photopaper device, it will be in the 85-90% range when charging to high SOC values at 20mA/cm2. The big advantage is that microporous membranes are really cheap and they still work even if dendrites pierce them. I must me clear that photopaper is meant as a DIY demonstration, a commercial unit would never use that but a polyethylene microporous separator - such as Daramic - with these memrbanes the CE and EE tend to be higher.
There are much cheaper membranes; ESS for example uses a membrane that is used by lithium ion batteries (I think) and thus is commonly available and very inexpensive.
the blog is listed in the first paragraph of the linked article: https://chemisting.com/2024/03/15/an-open-source-diy-flow-ba...
Perhaps report this issue to your malware provider rather than the site owner?